Artist:  Trash Mob Minis
Product: Patreon
         https://www.patreon.com/trashmobminis
         
You will need to download a copy of that product to use these correctly.
The artwork is not included to protect the rights of the copyright holders.

!!!Important Information!!!
This product contains the necessary registration marks to cut properly!

But...

That's only the case if you've got a newer Silhouette Portrait or Cameo. If 
you're running an older machine (like, a Silhouette SD or GraphTech model)
then you'll need to print from within Silhouette Studio. The following steps
outline one way to go about doing this. They may seem complicated, but this is
only because they are very detailed. Once you are familiar with the process, it
becomes very easy.

1)  Open the PDF using Adobe Reader.
2)  Edit > Preferences
3)  Select the General category
4)  Check "Use fixed resolution for Snapshot tool images" and set its 
    pixels/inch value to 300. Click OK.
5)  Edit > Take a Snapshot
6)  Click and drag to draw a rectangle around all of the graphics.
7)  Open a graphics program (Microsoft Paint, for example).
8)  Paste the image that was copied from Adobe Reader. Save this (for example,
    as "image.png")
9)  Open the cutfile associated with the page to print in Silhouette Studio.
10) File > Merge
11) Select the saved png image and click OK.
12) Right-click on the image and select Send to Back.
13) Move the image until it is lined up with the cutlines. You may need to 
    zoom in to see how well it lines up.
14) If you need to change the registration marks for any reason (e.g. if you 
    are using a very old Silhouette brand cutter that requires SD-style 
    registration marks), do that now.
15) Print the page.

These cutfiles were prepared by Paper Realms using Silhouette Studio version 4.2.279ss
Thank you for your support!
https://www.patreon.com/paperrealms